3A 02-11

Centrifugal and Positive Rotary Pumps for Milk and Milk Products

3-A Sanitary Standards / 14-Jul-2012 / 13 pages

These standards cover the sanitary aspects of centrifugal and positive rotary pumps for milk and milk products.

Ordering and availability

This publication is available both in printed and PDF edition.

CGA S-8-2012

Recommendations to Minimize Hazards of CG-7 Pressure Relief Valves and Ancillary Devices for Liquefied Petroleum Gas Cylinders, First Edition

Edition: 2nd
Compressed Gas Association / 01-May-2012 / 14 pages

In recent years, incidents have occurred that have been attributed to the improper application and maintenance
of the LPG cylinder and CG-7 PRV package. The purpose of this publication is to provide reference material
and guidelines to personnel who fill, store, and distribute LPG or maintain and refurbish LPG cylinders. This
information will promote the safe and proper filling and handling of LPG cylinders as well as the proper selection,
handling and maintenance of the CG-7 PRV. This information is limited to U.S. Department of Transportation
(DOT) and Transport Canada (TC) refillable cylinder designs.

This publication does not address overfill protection devices (OPD). (For information on OPD, see National Fire Protection Association (NFPA) 58, Liquefied Petroleum Gas Code.

Ordering and availability

This publication is available both in printed and PDF edition.

PIP PCSPA002-D-EEDS

Electronic Entry Data Sheets for Process Analyzer System [Reaffirmation with Editorial Revision]

Process Industry Practices / 01-Jun-2012 / 2 pages

PIP Data Forms are PDF files that contain protected Microsoft Word and/or Excel files which may be used for data entry.

This item is a single-user license. Multi-user licenses are also available as part of
Techstreet Subscriptions. Learn more by clicking here.

Ordering and availability

This publication is available both in printed and PDF edition.

ASTM F2588-12

Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles

ASTM International / 01-Jun-2012 / 11 pages

1.1 This test method specifies the test equipment and procedures for conducting tests to estimate the entry of chemical agent vapor simulant through protective ensembles while worn by test subjects.

1.2 This test method permits the evaluation of protective ensembles consisting of protective garments or suits, gloves, footwear, respirators, and interface devices.

1.3 The results of this test method yield local physiological protective dosage factors at individual locations of the human body as well as a systemic physiological protective dosage factor for the entire ensemble.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Keywords:
chemical agent; man-in-simulant testing; physiological protective dosage factor; protective ensemble; terrorism incident; vapor simulant; ICS Number Code 13.340.10 (Protective clothing)

Ordering and availability

This publication is available both in printed and PDF edition.

ARI Guideline N (2012)

Assignment of Refrigerant Color Containers

Air-Conditioning, Heating, and Refrigeration Institute (formerly ARI) / 2012 / 10 pages

This guideline publishes industry accepted, refrigerant specific color assignments for refrigerant containers and provides procedures for chemical producers to request color assignments for new refrigerants that are produced in significant quantities.

Ordering and availability

This publication is available both in printed and PDF edition.

ATIS 0300060

9YY NXX Code Assignment Guidelines

Alliance for Telecommunication Industry Solutions / 01-May-2012

Reissued with the resolution of Issue 713.

This document specifies guidelines for the administration and assignment of thousands-blocks (NXX-Xs) to Local Number Portability (LNP)-capable service providers (SPs) in rate centers where thousands-block number pooling has been ordered or implemented. All thousands-block requests and necessary forms will be submitted by SPs to the Pooling Administrator (PA) by filling out the appropriate request and/or form provided on the PA Web Site. No requests and/or form submissions will be accepted via fax, paper, voice, or e-mail, except in extraordinary circumstances, semi-annual Appendix 1, and/or if previously agreed to by the PA. An industry database will verify the password and access level of the user. All electronic submissions from an authorized user will be considered as an electronic signature and will be verified for authenticity utilizing criteria maintained in the PA database. In addition, these guidelines outline the processes used between the PA and: Code Holders, Telcordia® LERG® Routing Guide Assignees, Block Holders, The CO Code Administrator, Number Portability Administration Centers (NPAC), North American Numbering Plan Administrator (NANPA), and Regulatory Agencies.

Ordering and availability

This publication is available only in printed edition.

IEC 61300-3-38 Ed. 1.0 b:2012

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-38: Examinations and measurements – Group delay, chromatic dispersion and phase ripple

Edition: 1.0
International Electrotechnical Commission / 29-May-2012 / 83 pages

Ordering and availability

This publication is available both in printed and PDF edition.

SAE AS 58091A

Circuit Breakers, Trip-Free, Aircraft General Specification for

SAE International / 31-May-2012

The primary function of this specification is to cover the general requirements of one-, two-, and three-phase (often referred to as poles) trip-free circuit breakers for use in aircraft electric systems conforming to MIL-STD-704. As a secondary function, this specification may possibly cover the general requirements of one-, two-, and three- pole circuit breakers for use in primary vehicles, other than aircraft, when mounted directly to the structure.

Ordering and availability

This publication is available both in printed and PDF edition.

ANSI/ESD JS-001-2012

ESDA/JEDEC Joint Standard for Electrostatic Testing, Human Body Modal (HBM) – Component Level

Electrostatic Discharge Association / 16-Apr-2012 / 53 pages

Establishes the procedure for testing, evaluating, and classifying the electrostatic discharge sensitivity of components to the defined human body model (HBM).

Ordering and availability

This publication is available both in printed and PDF edition.