DIN EN ISO 17715

Flour from wheat (Triticum aestivum L.) – Amperometric method for starch damage measurement (ISO 17715:2013); German version EN ISO 17715:2014

Published by: DIN-adopted European-adopted ISO Standard / 2015-03-01 / 19 pages

Ordering and availability

This publication is available both in printed and PDF edition.

ASTM Volume 06.04:2015

ASTM Book of Standards Volume 6.04: Paints, Related Coatings, and Aromatics: Paint – Solvents; Aromatic Hydrocarbons

Published by: ASTM International / 2015-03-01 / 792 pages
Published annually in March.

This volume contains 167 standards.

Under the heading of solvents, this volume features specifications that establish the standard property requirements for various solvents, including aromatic hydrocarbons, alcohols, ketones, and esters. Accompanying the specifications are tests that define standard procedures for conducting physical and chemical tests on solvents and for determining solubility and miscibility. Others cover aromatic hydrocarbons and related chemicals, excluding those used as fuel or lubricants.

Ordering and availability

This publication is available only in printed edition.

BS EN 15502-2-2:2014

Gas-fired central heating boilers. Specific standard for type B1 appliances

Published by: British-Adopted European Standard / 2015-02-28 / 50 pages

Cross References:
EN 437:2003+A1:2009
EN 14459:2007
EN 15502-1:2012
EN 60730-2-9
IEC 60730-2-9
2009/142/EC
92/42/EEC
EN 15502-2-1:2012
CEN/TR 1749:2009

Replaces BS EN 297:1994, BS EN 625:1996, BS EN 677:1998 and BS EN 15417:2006 which remain current

All current amendments available at time of purchase are included with the purchase of this document.

Ordering and availability

This publication is available both in printed and PDF edition.

ASTM D975-15

Standard Specification for Diesel Fuel Oils

Published by: ASTM International / 2015-03-01 / 27 pages

1.1 This specification covers seven grades of diesel fuel oils suitable for various types of diesel engines. These grades are described as follows:

1.1.1 Grade No. 1-D S15-A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S15 fuel.2

1.1.2 Grade No. 1-D S500-A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S500 fuel.2

1.1.3 Grade No. 1-D S5000-A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S5000 fuels.

1.1.4 Grade No. 2-D S15-A general purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2

1.1.5 Grade No. 2-D S500-A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2

1.1.6 Grade No. 2-D S5000-A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum), especially in conditions of varying speed and load.

1.1.7 Grade No. 4-D-A heavy distillate fuel, or a blend of distillate and residual oil, for use in low- and medium-speed diesel engines in applications involving predominantly constant speed and load.

Note 1: A more detailed description of the grades of diesel fuel oils is given in X1.2.

Note 2: The Sxxx designation has been adopted to distinguish grades by sulfur rather than using words such as “Low Sulfur” as previously because the number of sulfur grades is growing and the word descriptions were thought to be not precise. S5000 grades correspond to the so-called “regular” sulfur grades, the previous No. 1-D and No. 2-D. S500 grades correspond to the previous “Low Sulfur” grades. S15 grades were not in the previous grade system and are commonly referred to as “Ultra-Low Sulfur” grades or ULSD.

1.2 This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of diesel fuels at the time and place of delivery.

1.2.1 Nothing in this specification shall preclude observance of federal, state, or local regulations which can be more restrictive.

Note 3: The generation and dissipation of static electricity can create problems in the handling of distillate diesel fuel oils. For more information on the subject, see Guide D4865.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Ordering and availability

This publication is available both in printed and PDF edition.

ISO 17469-1:2015

Document management – Strategy markup language (StratML) – Part 1: StratML core elements

Published by: International Organization for Standardization / 2015-03-01

ISO 17469-1:2015 specifies an Extensible Markup Language (XML) vocabulary and schema (XSD) for the elements that are common and considered to be part of the essential core of the strategic plans of all organizations worldwide.

This International Standard will not address

– how the information contained in strategic and performance plans and reports should be presented,

– specify font sizes or colours, page margins or numbering, or how graphics should be displayed, and

– provide guidance on how to compile high-quality plans, beyond specifying the basic elements that they should contain.

Ordering and availability

This publication is available both in printed and PDF edition.

ISO/IEC 18004:2015

Information technology – Automatic identification and data capture techniques – QR Code bar code symbology specification

Published by: International Organization for Standardization/International Electrotechnical Commission / 2015-03-01

ISO/IEC 18004:2015 defines the requirements for the symbology known as QR Code. It specifies the QR Code symbology characteristics, data character encoding methods, symbol formats, dimensional characteristics, error correction rules, reference decoding algorithm, production quality requirements, and user-selectable application parameters.

Ordering and availability

This publication is available both in printed and PDF edition.

BS ISO 10791-1:2015

Test conditions for machining centres. Geometric tests for machines with horizontal spindle (horizontal Z-axis)

Published by: British Standard / International Organization for Standardization / 2015-02-28 / 96 pages

Cross References:
http://www.techstreet.com/cgi-bin/joint.cgi/hraz/products/1827480
ISO 230-7
ISO 841
http://www.techstreet.com/cgi-bin/joint.cgi/hraz/products/1888480
http://www.techstreet.com/cgi-bin/joint.cgi/hraz/products/720889
http://www.techstreet.com/cgi-bin/joint.cgi/hraz/products/720890
http://www.techstreet.com/cgi-bin/joint.cgi/hraz/products/720890/Corrigendum 1:1992

All current amendments available at time of purchase are included with the purchase of this document.

Ordering and availability

This publication is available both in printed and PDF edition.

BS EN 16602-70-11:2015

Space product assurance. Procurement of printed circuit boards

Published by: British-Adopted European Standard / 2015-02-28 / 50 pages

Cross References:
EN 16601-00-01
EN 16602-70
EN 16602-70-02
EN 16602-70-07
EN 16602-70-08
EN 16602-70-10
EN 16602-70-28
EN 16602-70-38
IEC 60249 (1993-05)
IEC 60326-2-am 1 (1992-06)
IPC-4101
IPC-MF-150F
IPC-CF-152B
EN 16601-00
IEC 60194 (1999-04)

All current amendments available at time of purchase are included with the purchase of this document.

Ordering and availability

This publication is available both in printed and PDF edition.