MIL MIL-DTL-85052/6A

CLAMP, LOOP, ALUMINUM 2024-T42, 400 DEGREES F, FLUOROSILICONE (SUPERSEDING MIL-DTL-85052/6)

Published by: 2016-12-29 / 2016-12-29 / 11 pages
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-85052.

Ordering and availability

This publication is available both in printed and PDF edition.

IEC 62830-1 Ed. 1.0 b:2017

Semiconductor devices – Semiconductor devices for energy harvesting and generation – Part 1: Vibration based piezoelectric energy harvesting

Published by: 2017-03-03 / 2017-03-03 / 44 pages
IEC 62830-1:2017 defines terms, definitions, symbols, configurations, and test methods that can be used to evaluate and determine the performance characteristics of vibration based piezoelectric energy harvesting devices for practical use. This document is applicable to energy harvesting devices for consumer, general industries, military and aerospace applications without any limitations on device technology and size.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE J1468_201703

Oil Cooler Application Testing and Nomenclature

Published by: 2017-03-21 / 2017-03-21 / 25 pages
SAE J1468_201703 is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.

Ordering and availability

This publication is available both in printed and PDF edition.

MIL MIL-DTL-1183K

FITTING, PIPE, CAST BRONZE, SILVER BRAZING, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-F-1183H)

Published by: 2016-12-20 / 2016-12-20 / 13 pages
MIL-DTL-1183K covers pipe fittings of cast bronze with at least one end for silver-brazing into steam, air, oil, or water piping systems.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE J2403DA_201703

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

Published by: 2017-03-30 / 2017-03-30
This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the ‘Term’ tab, while the ‘Recommended Term Definitions’ tab provides the content of Table 3 in SAE J2403 and the ‘Glossary’ tab provides the content of Table 4 in SAE J2403.

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2291-2007 (R2017)

Metallic materials – Tensile testing at elevated temperatures

Published by: / 56 pages
Specifies the method by which a test piece of metal is strained in uni-axial tension at elevated temperature in order to determine one or more of its short-time tensile properties.

RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

MIL MIL-STD-1678-1D Notice 1 – Change 1

DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)

Published by: 2017-01-17 / 2017-01-17 / 114 pages
MIL-STD-1678-1D provides detailed design requirements for platforms that use cable harnesses as the means to transport data through optical fiber among communication network and end user equipment.

Ordering and availability

This publication is available both in printed and PDF edition.