Category Archives: MIL

MIL MIL-I-63120A Notice 3 – Validation

Intermediate Frequency/Discriminator/Square Amplifier Hybrid for XM122 Firing Device Receiver

Published by: 2013-10-11 / 2013-10-11 / 1 pages
This specification contains requirements not covered by the drawings and provides quality assurance provisions for the fabrication of parts, assembly and packing of one type of microcircuit hybrid module for the XM122 firing device receiver.

Ordering and availability

This publication is available both in printed and PDF edition.

MIL MIL-PRF-83419F

Altimeter, Servo Controlled, Automatic Pressure Standby

Published by: 2016-10-11 / 2016-10-11 / 56 pages
This specification covers integrally-lighted altimeters that have an electromechanically servo driven pointer and a digital display of corrected altitude. The altimeters operate in the normal mode to display altitude transmitted by altitude computers or central air data computers. The altimeters incorporate an integral pressure sensor with electronic outputs to aid operation in the normal mode and to provide altitude inputs for the electronic display of pressure altitude when operated in the standby mode. The altimeters also incorporate an electrical output of barometric pressure setting which is required by some aircraft. A method is provided on the bezel of the altimeter for the selection of barometric setting to be displayed in either inches of mercury (in. hg) or millibars (mb). The altimeters are designed to operate from the following power sources: 115V, 400Hz (primary), 28V DC (secondary), and 18V DC (battery mode) from an optional rear mounted battery module. Altimeters meeting the requirements of this specification are interchangeable with AAU-19/A, AAU-19A/A, and AAU-19B/A, AAU-34/A, and AAU-37/A Altimeters.

Ordering and availability

This publication is available both in printed and PDF edition.

MIL MIL-M-38510/78B Notice 2 – Validation

Microcircuits, Digital, Schottky TTL, Arithmetic Logic Unit / Function Generators, Monolithic Silicon

Published by: 2015-04-10 / 2015-04-10 / 1 pages
This specification covers the detail requirements for monolithic silicon, Schottky TTL, arithmetic logic unit / function generators. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

Ordering and availability

This publication is available both in printed and PDF edition.

MIL MIL-DTL-55036C

Cable, Telephone, WM-130( )/G

Published by: 2011-02-28 / 2011-02-28 / 20 pages
This specification covers the requirements of a 26 pair telephone cable, insulated with polyethylene, armored with a galvanized steel braid, and covered with a polyvinylchloride low temperature jacketing compound. This cable is designated as Cable, Telephone WM-130( )/G (see 6.8).

Ordering and availability

This publication is available both in printed and PDF edition.