Category Archives: SAE

SAE J3083_201703

Reliability Prediction for Automotive Electronics Based on Field Return Data

Published by: 2017-03-17 / 2017-03-17 / 22 pages
SAE J3083_201703 should be used as guidance for non-handbook based reliability predictions conducted on automotive electronics products. It presents a method that utilizes warranty and field repair data to calculate the failure rates of individual electronic components and predict the reliability of the entire electronic system. It assumes that the user has access to a database containing field return data with classification of components, times to failure, and a total number of components operating in the field.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE J1344_201703

Marking of Plastic Parts (Stabilized: Mar 2017)

Published by: 2017-03-28 / 2017-03-28 / 26 pages
SAE J1344_201703 provides a system for marking plastic parts to designate the type
of material from which the part was fabricated.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE AMS4782G

Nickel Alloy, Brazing Filler Metal 71Ni – 10Si – 19Cr 1975 DEGREES F (1080 DEGREES C) Solidus, 2075 DEGREES F (1135 DEGREES C) Liquidus

Published by: 2017-03-28 / 2017-03-28 / 5 pages
SAE AMS4782G covers a nickel alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE J2762_201703

Method for Removal of Refrigerant from Mobile Air Conditioning System to Quantify Charge Amount

Published by: 2017-03-10 / 2017-03-10 / 9 pages

This Standard provides an overview of results and requirements needed to remove refrigerant from a mobile air conditioning system for determining refrigerant emissions (leakage).

This reclaim procedure for use on fleet vehicles in a field service environment should produce an accuracy and repeatability sufficient to determine refrigerant loss within 2 g.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE AS47643

Verification Methods for MIL-STD-1760E Aircraft Station Interfaces

Published by: 2017-03-30 / 2017-03-30 / 190 pages
SAE AS47643 establishes techniques for validating that an Aircraft Station Interface (ASI) complies with the interface requirements delineated in MIL-STD-1760 Revision E.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE ARP4162B

Balancing Machine Proving Rotors

Published by: 2017-03-17 / 2017-03-17 / 10 pages
SAE ARP4162B specifies a series of balancing machine proving rotors and related test weights as directly required for the evaluation of gas turbine rotor balancing machines.

Ordering and availability

This publication is available both in printed and PDF edition.

SAE AMS03_4A

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa (Stabilized: Mar 2017)

Published by: 2017-03-21 / 2017-03-21 / 19 pages
SAE AMS03_4A specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.

Ordering and availability

This publication is available both in printed and PDF edition.