Tag Archives: AS

AS 1406-2004 (R2017)

Electroplated coatings – Nickel and chromium on plastics for decorative applications

Published by: 2004-04-02 / 2004-04-02 / 24 pages
Specifies the requirements for electroplated coatings for nickel and nickel plus chromium on plastics for decorative applications.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 1627.6-2003 (R2017)

Metal finishing – Preparation and pretreatment of surfaces – Chemical conversion treatment of metals

Published by: 2003-07-11 / 2003-07-11 / 40 pages
Specifies requirements and procedures for the chemical conversion treatment of metals prior to the application of suitable organic protective coating and includes phosphate conversion of ferrous and non-ferrous and chromate conversion of aluminium, magnesium, zinc and their alloys.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 1627.5-2003 (R2017)

Metal finishing – Preparation and pretreatment of surfaces – Pickling

Published by: 2003-07-11 / 2003-07-11 / 32 pages
Specifies procedures for preparing metal surfaces by immersion or by other means, employing chemical solutions to remove oxidation products (scale), corrosion products and related foreign materials.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2331.1.2-2001 (R2017)

Methods of test for metallic and related coatings – Local thickness tests – Coulometric method

Published by: 2001-06-19 / 2001-06-19 / 20 pages
Specifes a method, based on anode dissolution, for measuring the thickness of metallic coatings. An Appendix lists typical electrolytes which can be used for measuring the thickness of various coating types on common metal substrates.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 4169-2004 (R2017)

Electroplated coatings – Tin and tin alloys

Published by:
Specifies requirements for electroplated coatings of nominally pure in on fabricated metal articles including tin-coatings on electron components. Adopted with national modifications and reproduced from ISO 2093:1986.
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 1231-2000 (R2017)

Aluminium and aluminium alloys – Anodic oxidation coatings

Published by: 2000-07-19 / 2000-07-19 / 36 pages
Specifies requirements for anodic oxidation coatings on aluminium and its alloys for general applications and for external architectural applications. Appendices give guidance on the choice of aluminium grades and coating thickness grades, on the maintenance, handling and transportation of anodised products and on the application of test methods for anodised coatings.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2331.3.4-2001 (R2017)

Methods of test for metallic and related coatings – Corrosion and related property tests – Thioacetamide anti-tarnish and porosity tests

Published by:
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2331.1.1-2001 (R2017)

Methods of test for metallic and related coatings – Local thickness tests – Micrographic examination of cross-sections

Published by: 2001-06-19 / 2001-06-19 / 12 pages
Specifies a method for measuring the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings by the microscopical examination of cross-sections using an optical microscope.

RECONFIRMATION NOTICE

Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.

The following are represented on Technical Committee MT-009:

Australasian Institute of Surface Finishing

Australian Chamber of Commerce and Industry

Australian Industry Group

Australian Steel Institute

Bureau of Steel Manufacturers of Australia

Galvanizers Association of Australia

Galvanizing Association of New Zealand

New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2331.2.3-2001 (R2017)

Methods of test for metallic and related coatings – Tests for average coating mass per unit area or for thickness – Hydrogen evolution method for zinc coatings

Published by:
Sets out the hydrogen evolution method for the determination of the average mass per unit area, or thickness, of zinc coatings on steel. The test requires the use of apparatus to measure the volume of hydrogen liberated resulting from the dissolution of the coating.
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.

AS 2331.1.3-2001 (R2017)

Methods of test for metallic and related coatings – Local thickness tests – Magnetic method

Published by:
Specifies a method of using coating thickness instruments of the magnetic type for non-destructive measurements of the thickness of non-magnetic coatings (including vitreous and porcelain enamel coatings) on magnetic basis metals.
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers

Ordering and availability

This publication is available both in printed and PDF edition.