Tag Archives: IAPMO

IAPMO PS 51-2016

Expansion Joints and Flexible Expansion Joints for DWV Piping Systems

Published by: 2016-10-03 / 2016-10-03 / 15 pages
This Standard covers plastic, elastomeric, and metallic expansion joints and flexible expansion
joints intended for use in drain, waste, and vent systems and specifies requirements for
materials, physical characteristics, performance testing, and markings.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 324-2016

Alternate Water Source Systems

Published by: 2016-09-12 / 2016-09-12 / 16 pages
1 Scope

1.1.1 This Standard covers alternate water source systems intended to process water from alternate water sources such as greywater, rainwater, atmospheric generated water, and air conditioning condensate, for use in subsurface and/or surface irrigation and toilet/urinal flushing applications, and specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.2 Alternate water source systems covered by this Standard are of the
(a) catch basin only type, intended to supply water for use in subsurface irrigation; or
Note: An example of a schematic for the catch basin only type system is shown in Figure 1.
(b) catch basin plus separate, connected, reverse osmosis and UV processing station type, intended to supply water for surface irrigation and toilet/urinal flushing applications.
Note: An example of a schematic for the reverse osmosis and UV processing is shown in Figure 2.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 334-2016a

Push Fit Drain, Waste, and Vent (DWV) Fittings

Published by: 2016-01-01 / 2016-01-01 / 13 pages
This Standard covers reversible 1-1/2″, 2″, and 3″ NPS push fit drain, waste, and vent fittings intended for quick assembly of DWV pipe and fittings applications, and specifies requirements for materials, physical characteristics, performance testing, and markings.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 319-2016

Metal Insert Fittings for PEX and PE-RT Tubing

Published by: 2016-01-01 / 2016-01-01 / 7 pages
1 Scope

1.1 General

1.1.1 This Standard covers metal insert fittings for use with PEX tubing that complies with ASTM F876, or CSA B137.5, and PE-RT tubing that complies with and ASTM F2623 or ASTM F2769, and specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.2 Metal insert fittings covered by this standard connect tubing through utilization of a ring inserted over the pipe and an insert fitting inserted inside the pipe.

1.1.3 Metal insert fittings for PEX and PE-RT tubing covered in this standard have a minimum pressure-temperature rating of 690 kPa (100 psi) at 82 °C (180°F).

1.1.4 This standard does not cover metal insert fittings already covered by ASTM F1807, or ASTM F1960.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 154-2016

Shower and Tub/Shower Enclosures, Bathtubs with Glass Pressure-Sealed Doors, and Shower/Steam Panels

Published by: 2016-11-07 / 2016-11-07 / 18 pages
Scope

1.1.1 This Standard covers shower/steam panels, enclosures for showers and tub/shower combinations, bathtubs and tub/shower combinations with glass pressure-sealed doors, and floor-mounted showers intended for new and retrofit applications and specifies requirements for materials, physical characteristics, performance testing, and markings.
Note: In this Standard, “enclosures for showers and tub/shower combinations” are referred to as “enclosures”.

1.1.2 Shower/steam panels and enclosures covered by this Standard can include
(a) factory-installed supply and waste fittings;
(b) factory-formed shower thresholds; and
(c) factory-plumbed shower doors.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 330-2016

Recirculating Shower Systems

Published by: 2016-01-01 / 2016-01-01 / 20 pages
1 Scope

1.1 Scope

1.1.1 This Standard covers portable and stationary recirculating shower systems intended for new and retrofit residential and commercial applications and specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.2 Recirculating shower systems covered by this standard, as shown in Figure 1, may operate in
(a) recirculating mode, which recycles shower water for reuse; or,
(b) bypass mode, which doesn’t recirculate shower water but operates as a conventional, normal shower.

1.1.3 Shower systems covered by this Standard may be manufactured with plastic and/or glass pressure-sealed walls, a showerhead, a shower panel with handheld showerhead, and a shower pan with water filtering and electrical recirculating components. These systems can include
(a) factory-installed supply and waste fittings;
(b) factory-formed shower thresholds; and
(c) factory-installed shower walls and/or panels.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO PS 117-2016

Press and Nail Connections

Published by: 2016-05-16 / 2016-05-16 / 16 pages
1 Scope

1.1 Scope

1.1.1 This Standard covers press and nail connections made with
(a) copper or copper alloy fittings and Type K, L, and M copper tube;
(b) carbon steel fittings and Schedule 10 and 40 carbon steel pipe;
(c) stainless steel fittings and Schedule 5, 10, and 40 stainless steel pipe; or
(d) stainless steel fittings and stainless steel pipe complying with the dimensions specified in Table 1.

1.1.2 This Standard specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.3 Products covered by this Standard include fittings, tube, and pipe with press or nail connection ends combined with other types of connections (e.g., threaded, soldered, and push-fit).

1.1.4 Carbon steel fittings and pipe covered by this Standard are not intended to be used in plumbing systems.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 333-2016

Vent Pipe Plastic Membrane Funnels

Published by: 2016-08-08 / 2016-08-08 / 10 pages
1 Scope

1.1 Scope

1.1.1 This Standard covers vent pipe plastic membrane funnels intended for installation on vertical vent piping systems and specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.2 Vent pipe plastic membrane funnels are installed on vent pipe to re-route any moisture (such as rain) that may trickle down the outside the vent pipe to the inside of the vent pipe and into the drain waste system while not compromising the integrity of the vent pipe.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO IGC 328-2016

Flexible Fixture Trap Arms

Published by: 2016-01-01 / 2016-01-01 / 11 pages
This Standard covers exposed, accessible, and non-wall penetrating flexible trap arm assemblies that include couplings, directional fittings, and tubular fittings intended for connecting fixture traps to the sanitary drainage system, and specifies requirements for materials, physical characteristics, performance testing, and markings.

Ordering and availability

This publication is available both in printed and PDF edition.

IAPMO TS 35-2016

Flexible Drainage, Waste and Vent Connectors for Use in Recreational Vehicles

Published by: 2016-01-01 / 2016-01-01 / 9 pages
1 Scope

1.1 Scope

1.1.1 This Standard covers flexible drainage, waste and vent connectors with fittings on either end intended for drainage, waste and vent applications in recreational vehicles and specifies requirements for materials, physical characteristics, performance testing, and markings.

1.1.2 The flexible drainage, waste and vent connectors covered by this standard can be
(a) designed for use in recreational vehicle slide-out sections whereby a drain connection shall be maintained when the slide-out is in either the extended or retracted position.
(b) corrugated and un-corrugated connectors with fittings on either end.
Note: Fittings may be fixed or swivel type.

Ordering and availability

This publication is available both in printed and PDF edition.